THE MACHINE IS EQUIPPED WITH:

- Wheels to move the machine
- Rolls supporting device dia. 700mm
- Glue tank with electronic control of the temperature at 
  200^o-130^o. when the doesn't work, the temperature automatically
  goes down from 200^o-130^o
- Shears unit with pneumatic system to cut edges from 0.4 to 3mm
   with automatic kickback of the edge
- Cutters with 2mm radius with 2 knives
- Edge pressure unit complete with 2 rollers, Adjsutable through
  digital numerical read out: 
  * 1^st motorized roller with separate, adjustable pressure system
  * 2^nd idle roller with separate adjustable pressure system
- Lateral support with conveyor roller for wide panels
- No. 1 suction hood dia. 50mm
- No. 1 Suction hood dia. 100mm
- Manual upper pressure with rubber wheels with adjustment 
  through numerical read-out.
- 'CE' standards

- Dimensions                   : 2600x1250x1750 mm
- Net weight                   : 880 kg
- Min. lenght of workpiece : 200 mm
- Min. width of workpience : 80 mm
- Thickness of workpiece   : 8~40 mm
- Edge width                   : 12~45 mm
- Thickness of roll edge banding Materials: 0.4~3 mm
- Feeding speed               : 9.2 m/min
- Noise                           : <83 dB(A)
- Total Power                  : 4.75kw

SPECIFICATION OF EXTERNAL POWER SOURCE:

- Voltage                                         :  3P 400 +5% V
- Frequency                                     : 50Hz
- Diameter of inlet wire (l1/L2/L3)         : 4mm²
- Diameter of protective grounding wire : PE 4mm²

 SPECIFICATIONS OF GAS SOURCE

- Air pressure                 : 0.6MPa
- Diameter of intake pipe  : >10mm